A good e-waste drive takes about four weeks of planning and a three-to-four-hour event. Line up a recycler first, agree on exactly what you will accept, pick a site with easy drive-through traffic, and tell people to wipe or remove their data before they come. Most problems at e-waste drives come from items nobody planned for, so a clear "yes / no" list matters more than anything else.
- Pick a recycler
- Set the item list
- Plan the site
- Promote it
- Run the day
On this page
Who runs e-waste drives in Dallas–Fort Worth?
E-waste drives are one of the easiest community events to organize, and they solve a real problem: closets full of old laptops, monitors and phones that nobody knows what to do with. Around DFW they are usually run by:
- Workplaces
Office parks and companies
An "electronics amnesty day" for employees and tenants, often tied to an IT refresh.
- Schools
PTAs and student clubs
Earth Day and service projects, with families dropping off at the campus parking lot.
- Faith groups
Churches and nonprofits
A Saturday morning drive that also clears the church office's own old equipment.
- Neighborhoods
HOAs and civic groups
A clean-up day where electronics are one station among several.
Cities run their own collection days too. Mesquite, for example, holds its Mesquite Recycles Day with electronics drop-off twice a year, in May and November. Check your city's calendar so your drive doesn't land on the same weekend.
Four-week planning timeline
| When | What to do |
|---|---|
| 4 weeks out | Choose a recycler, a date and a site. Get written permission from the property owner or school. |
| 3 weeks out | Agree on the accepted-items list, truck size, arrival time and who loads. Make the flyer. |
| 2 weeks out | Promote: newsletters, Nextdoor, social posts, church bulletins, school apps, local event calendars. |
| 1 week out | Recruit and brief volunteers. Print signs. Send a reminder with the item list and data tips. |
| Event day | Set up an hour early, run the drive-through, keep a rough count, close on time. |
| Within a week | Thank volunteers and participants, share what was collected, note what to change next time. |
Questions to ask a recycler before you book
The recycler decides what you can accept and how smooth the day will be. Ask these questions up front and get the answers in writing:
- What items do you accept, and are any charged? TVs, CRT monitors and appliances are the usual exceptions.
- How are drives and phones handled? Ask whether data-bearing devices are wiped or physically destroyed.
- What do you bring? A box truck, pallets, large boxes, a pallet jack, and how many crew members.
- Who loads? Volunteers stack items at a staging area, or the recycler's crew loads directly.
- What happens if we collect more than expected? A second trip, or a follow-up pickup.
- Can you tell us roughly what was collected? A count or estimate is great for your thank-you post.
What to accept and what to refuse
Put this list on every flyer and repeat it in every reminder. A short, clear list keeps the line moving and avoids awkward refusals at the car window.
Bring these
- Desktops, laptops and tablets
- Flat-screen monitors
- Printers, scanners and fax machines
- Keyboards, mice, cables and chargers
- Phones, routers, modems and switches
- Servers and networking gear
Ask your recycler
- TVs and CRT monitors
- Large appliances
- Loose or swollen batteries
- Light bulbs and fluorescent tubes
- Paint, chemicals and other hazardous waste
- Smoke detectors
If someone shows up with a refused item, have a printed half-sheet ready that lists other options, such as the county's household hazardous waste site or the free manufacturer take-back programs on the TCEQ Texas Recycles page.
Site layout, signs and volunteers
The best layout is a one-way drive-through loop, so people never have to get out of their car. A church or school parking lot with separate entry and exit drives works well.

Greeter at the entrance
Checks each car against the item list and points refused items to the info half-sheet.
Unloaders at the drop zone
Two or three people with gloves who lift items out of trunks and carry them to staging.
Sorters at staging
Put items into stacks by type, on pallets or in large boxes, so the truck loads fast.
A counter
Keeps a tally of cars and a rough item count. It makes the thank-you post much better.
Safety basics
Gloves, water, a first-aid kit, cones for traffic, and a rule that nobody lifts heavy CRTs alone.
What about the data on donated devices?
People bring laptops and phones full of photos, passwords and tax returns. Your event should make it easy to do the right thing:
- Tell people in advance to back up, sign out of their accounts and factory reset phones and tablets.
- Explain that a reset is not always enough for computers, and that the recycler wipes or destroys drives.
- Keep devices in a closed area, not in an open pile at the curb, and hand everything straight to the recycler.
- Never let volunteers take items home. Reuse should happen through the recycler, after data is cleared.
Tip: Link to our guide on protecting data when you recycle computers in your reminder email. It answers most of the questions you will get at the table. Businesses joining an office drive should also read our summary of Texas e-waste rules for businesses.
After the event
Thank your volunteers, post a photo of the loaded truck, and share how many cars came through and roughly what was collected. That post is what brings more people next time. Write down what you would change while it is fresh: the start time, the signs, the item list.
E-waste drive checklist
From planning to clean-upKeep this list for next year. Most drives get easier, and bigger, the second time.
Planning an e-waste day for a business in Dallas–Fort Worth?
CompletePC-World provides computer electronics recycling for businesses, schools and offices, with free pickup for qualifying loads in Dallas, Garland, Mesquite, Balch Springs, Plano and across DFW.
Pickup is for businesses only. Residents can use our Saturday drop-off in Garland, 10 AM–4 PM.
- Plan early
- Keep the list short
- Protect the data
- Share the results
Frequently asked questions
How do I organize an e-waste drive?
Start about four weeks out: book a recycler, choose a date and a site with drive-through traffic, agree on what you will accept, promote it two weeks ahead, brief volunteers, and run a three-to-four-hour event with a simple drop-off loop.
What items are usually accepted at an e-waste drive?
Computers, laptops, tablets, flat-screen monitors, printers, phones, networking gear, cables and chargers are usually accepted. TVs, CRT monitors, appliances, loose batteries and hazardous waste often are not, so check with your recycler.
How long should an e-waste drive last?
Three to four hours on a Saturday morning works for most schools, churches and neighborhoods. It is long enough for people to come by and short enough to keep volunteers.
Should people wipe their devices before an e-waste drive?
Yes. Ask people to back up, sign out of accounts and factory reset phones and tablets. For computers, a reset is not always enough, so choose a recycler that wipes or destroys drives.
Can CompletePC-World help with an office e-waste day?
Yes. We pick up business electronics free for qualifying loads across Dallas–Fort Worth. Call (945) 220-1585 to talk through what we can collect for your event.
Do you pick up electronics from homes?
No. Pickup is for businesses only. Residents can drop off electronics at our Garland location on Saturdays, 10 AM to 4 PM.




